90 Degree Forming Punches and Dies

Number 11 punch and numbers 12, 14, 16, 18 dies are economical dies for low cost forming of light gauge sheet metal, especially for short flange work.

General Purpose dies are easily modified in many ways to meet special forming and bending requirements- larger or smaller radius, special angles, clearances, etc.

When forming 10 ga. metals and heavier, we recommend using our number 17, 19, 21, and 23 with their respective dies. However, air forming is most common here, in order to keep press brake tonnage reqirements to a minimum and to prevent material fracture.

[ Home ] [ Standard and Hook ] [ 90 Degree Punches and Dies ] [ Gooseneck Punches ] [ 30 Degree Punches and Dies]

DW Press Quip

DW Press Quip
P.O. Box 55732
Houston, Texas
77255-5732
Ph - 713-464-7613
Fax 713-464-9028
dwpress@aol.com
Sales Engineer - Frank Mellen